Features and Benefits
Digital Speed Control - automatically selects RPM speed to provide safe operation and maximum sensitivity. No dials or knobs to adjust.
Automatic Shut-Off - after completing the measurements, the machine will stop automatically allowing for unattended operation.
Bobweight Card - computes and displays bobweight based on information entered. Bobweight card is printed when optional printer is connected.
Hard Bearing Design - exclusive design allows for greater sensitivity resulting in accurate and repeatable measurements.
Drill Depth - calculates the proper drill depth for material removal. No charts or tables required... eliminating miscalculations.
Printer Option - optional printer displays how much unbalance is present and the results after making corrections. Setup Memory - up to 100 setups can be stored in battery-backed memory. Fast retrieval allows for quick setup.
Jog Button - allows the work piece to rotate slowly for verification of setup and belt alignment.
Compact Size - design features allow for floor space savings, lower shipping cost and storage under the base of the machine.
Add/Remove Selection - with the touch of a button the proper angle and weight is displayed for either adding or removing material.
Speed Control Safety Feature - automatically shuts machine down if unsafe condition occurs.
Swivel Control Platform - allows user to position controller for easy access.
Heavy-Duty Drill Tower - turns 90 degrees to allow the operator to easily drill and install heavy metal into crankshaft counter weights. Slides the full length of the balancer for ease and convenient use.
Automatic Shut-Off - after completing the measurements, the machine will stop automatically allowing for unattended operation.
Bobweight Card - computes and displays bobweight based on information entered. Bobweight card is printed when optional printer is connected.
Hard Bearing Design - exclusive design allows for greater sensitivity resulting in accurate and repeatable measurements.
Drill Depth - calculates the proper drill depth for material removal. No charts or tables required... eliminating miscalculations.
Printer Option - optional printer displays how much unbalance is present and the results after making corrections. Setup Memory - up to 100 setups can be stored in battery-backed memory. Fast retrieval allows for quick setup.
Jog Button - allows the work piece to rotate slowly for verification of setup and belt alignment.
Compact Size - design features allow for floor space savings, lower shipping cost and storage under the base of the machine.
Add/Remove Selection - with the touch of a button the proper angle and weight is displayed for either adding or removing material.
Speed Control Safety Feature - automatically shuts machine down if unsafe condition occurs.
Swivel Control Platform - allows user to position controller for easy access.
Heavy-Duty Drill Tower - turns 90 degrees to allow the operator to easily drill and install heavy metal into crankshaft counter weights. Slides the full length of the balancer for ease and convenient use.
Model DCB-2000HD Specifications
Weight: 3,000 lbs. (1363,6kg)
Power: 220 VAC, 8 amps
Motor: 1.5 HP (kW) DC
Balance Speed: 350, 500, 750 RPM
Unbalance Resolution: +/- .2 gm/inch
Angle Resolution: 120 divisions/rotation (3.0 degrees)
Angle Repeat-ability: +/- 1 division
Setup Units: Inch or Metric
Unbalance Units: Ounces or Grams
Dimensions: 100" L x 30" W x 72" H
(2540mm L x 762mm W x 1828,8mm D)
Capacity: 1,000 lbs. (454,6kg)
Maximum Length: 84" (2133,6mm)
Maximum Diameter: 24" (609,6mm)
Power: 220 VAC, 8 amps
Motor: 1.5 HP (kW) DC
Balance Speed: 350, 500, 750 RPM
Unbalance Resolution: +/- .2 gm/inch
Angle Resolution: 120 divisions/rotation (3.0 degrees)
Angle Repeat-ability: +/- 1 division
Setup Units: Inch or Metric
Unbalance Units: Ounces or Grams
Dimensions: 100" L x 30" W x 72" H
(2540mm L x 762mm W x 1828,8mm D)
Capacity: 1,000 lbs. (454,6kg)
Maximum Length: 84" (2133,6mm)
Maximum Diameter: 24" (609,6mm)