Features and Benefits
Digital Speed Control - automatically selects RPM speed to provide safe operation and maximum sensitivity. No dials or knobs to adjust.
Automatic Shut-Off - after completing the measurements, the machine will stop automatically allowing for unattended operation.
Weight-A-Minute - software provieds bobweight calculator, heavy metal calculator, drill depth calculator and flywheel conversion calculator.
Hard Bearing Design - exclusive design allows for greater sensitivity resulting in accurate and repeatable measurements.
Drill Depth - calculates the proper drill depth for material removal. No charts or tables required... eliminating miscalculations.
Printer Option - optional printer displays how much unbalance is present and the results after making corrections. Setup Memory - no limit on the setups which can be stored in the battery-backed memory. Fast retrieval allows for quick setup.
Jog Button - allows the workpiece to rotate slowly for verification of setup and belt alignment.
Compact Size - design features allow for floor space savings, lower shipping cost and storage under the base of the machine.
Add/Remove Selection - with the touch of a button the proper angle and weight is displayed for either adding or removing material.
Speed Control Safety Feature - automatically shuts machine down if unsafe condition occurs.
Swivel Control Platform - allows user to position controller for easy access.
Heavy-Duty Drill Tower - turns 90 degrees to allow the operator to easily drill and install heavy metal into crankshaft counter weights. Slides the full length of the balancer for ease and convenient use.
Bobweight Card - computes and displays bobweight based on information entered. Bobweight card is printed when optional printer is connected. Also saves and stores all bobweight information for later use.
Industry First - identifies 305, 350 and 4.6 L crankshafts.
Automatic Shut-Off - after completing the measurements, the machine will stop automatically allowing for unattended operation.
Weight-A-Minute - software provieds bobweight calculator, heavy metal calculator, drill depth calculator and flywheel conversion calculator.
Hard Bearing Design - exclusive design allows for greater sensitivity resulting in accurate and repeatable measurements.
Drill Depth - calculates the proper drill depth for material removal. No charts or tables required... eliminating miscalculations.
Printer Option - optional printer displays how much unbalance is present and the results after making corrections. Setup Memory - no limit on the setups which can be stored in the battery-backed memory. Fast retrieval allows for quick setup.
Jog Button - allows the workpiece to rotate slowly for verification of setup and belt alignment.
Compact Size - design features allow for floor space savings, lower shipping cost and storage under the base of the machine.
Add/Remove Selection - with the touch of a button the proper angle and weight is displayed for either adding or removing material.
Speed Control Safety Feature - automatically shuts machine down if unsafe condition occurs.
Swivel Control Platform - allows user to position controller for easy access.
Heavy-Duty Drill Tower - turns 90 degrees to allow the operator to easily drill and install heavy metal into crankshaft counter weights. Slides the full length of the balancer for ease and convenient use.
Bobweight Card - computes and displays bobweight based on information entered. Bobweight card is printed when optional printer is connected. Also saves and stores all bobweight information for later use.
Industry First - identifies 305, 350 and 4.6 L crankshafts.
Model Specifications
Upgrades
Weight:2100 lbs. (954,5kg)
Power:115 VAC, 15 amps Motor:.75 HP (0,56kW) DC Balance Speed:350, 500, 750 RPM Unbalance Resolution:+/- .2 gm/inch Angle Resolution:120 divisions/rotation (3.0 degrees) Angle Repeatability:+/- 1 division Setup Units:Inch or Metric Unbalance Units:Ounces or Grams Dimensions:70" L x 30" W x 72" H (1778mm L x 762mm W x 1828,8mm D) Capacity:500 lbs. (226kg) Maximum Length:48" (1219,2mm) Maximum Diameter:24" (609,6mm) |